5. User interface > 5.7. Viewing images
5.7. Viewing images
The Image Area shows the planning and monitoring images produced by the MR console in four
separate windows. The protocol name and the date and time of the image, as well as the currently
displayed image plane are shown on the upper edge of each window. For the image in the lower
right corner, you can freely select the plane by right-clicking on image plane name in the upper
right corner of that image.
Fig. 32: Selecting the viewing plane: Plane (1), Time (2), Scan protocol (3),
Right-click on plane name (4), Select a plane (5).
Click on an image in the Image Area to select it for viewing.
You can view the images in various sequences and directions using the three groups of buttons on
the toolbar:
Basic viewing tools.
Advanced viewing tools.
Overlay tools.
The viewing tools available may vary between the treatment stages.
Instructions for Use
109745C2 / 02-2022
63 (192)