Camera Tampering (Camera Shifting / Lens Tampering / Camera Masking); Line Crossing - Provision ISR IP Series User Manual

Page 59
3. Missing object or left item can be repeated for up to 4 deferent areas. All the rules and
requirement are the same.
6.3 Camera Tampering (Camera shifting / Lens tampering / Camera
masking)
This Analytics is designed to detect physical damage to the camera that might prevent it
from protecting its designated area. It will alert against any changes that occurred in the
camera after its initial installation and include:
1. Camera shifting: In case the camera was forcibly moved out of place so it wouldn't
cover the required area.
2. Camera Masking: Detects if the camera was covered or tampered in a way that
blocks its view.
3. Lens Tampering: Detects lens tampering causing blurred image.
Configuration requirements:
There are no special requirements for the camera tampering analytics

6.4 Line Crossing

Detects if an object crossed a defined line. The crossing direction can be adjusted from
each side of the line or from both sides.
Configuration requirements:
IP CAMERA USER MANUAL