Ddns Configuration; Snmp; 802.1X; Rtsp - Provision ISR IP Series User Manual

Page 40
IP CAMERA USER MANUAL
(usually it is the Ossia VMS address which needs to be a static address or DDNS). Set a unique
device ID. Each of the devices using auto server report should have its own ID.
The Camera will report back to the defined server its current IP using port 2009.

4.6.4 DDNS Configuration

1. Enter into "Network"→"DDNS" tab as below:

4.6.5 SNMP

Simple Network Management Protocol (SNMP) is a popular protocol for network management.
It is used for collecting information from and configuring, network devices, such as servers,
printers, hubs, switches, and routers on an Internet Protocol (IP) network. In order to Enable
and work with SNMP, you need that the switch or another server on the network will support
this protocol as well. Though our IPC fully supports SNMP will not explain how to configure it
in this manual.

4.6.6 802.1X

The 802.1X standard is designed to enhance the security of wireless and local area networks
(WLANs) that follow the IEEE 802.11 standard. 802.1X provides an authentication framework
for wireless LANs, allowing a user to be authenticated by a central authority.

4.6.7 RTSP

RTSP is used to stream video/audio using the shared protocol. v4.2 is also supporting RTSP
using Multicast protocol.
Go to "Network"→ "RTSP" interface as shown below.