Block And Allow Lists - Provision ISR IP Series User Manual

Page 48
IP CAMERA USER MANUAL
You can view the IP address, port, username and user type used for the connection.
The "Kick Out" button will kick out the selected user and input his IP address to the blacklist.
Click on it for the relevant user and confirm the prompt message.
Important Note: once the user is kicked out, the IP address used for connection will be
blacklisted. Therefore, the device used for connection will not be able to connect to the
camera until the IP address will be manually removed from the blacklist.

4.1.3 Block and Allow Lists

"Block and Allow" lists allow the user to create lists of IP/MAC addresses that will be allowed
or denied for connection.
Once a "Block" list is created, all devices except the blocked devices will be allowed to connect
to the camera.
Once an "Allow" list is created, all devices except the allowed devices will be blocked from
connecting to the camera.
Go to "Network" →"Block and Allow Lists" to access the following interface.
The lists can be based on IP Only / MAC only / Both IP and MAC together.