P2P; Qos; Security; User - Provision ISR IP Series User Manual

Page 46
IP CAMERA USER MANUAL

4.6.12 P2P

P2P is used to connect directly to the camera through an advanced NAT interface.
Go to "Network" →"P2P".
Enable P2P if required.
Once enabled you can refer to "Settings"→"System"→"Basic Information"
Scan the QR code using the "Provision Cam2" mobile APP or input the device ID manually in
the P2P domain (http://www.provisionisr-cloud.com).

4.6.13 QoS

Quality of Service (QoS) is an advanced feature that prioritizes internet traffic for applications
to minimize the impact of busy bandwidth. It must be supported by the switch/router being
used.

4.1 Security

Security configuration includes three submenus: User Settings, Online Users, and Block &
Allow lists.

4.1.1 User

Go to "Network" →"User" to access the following interface.