Sterile Area - Provision ISR IP Series User Manual

Page 30
IP CAMERA USER MANUAL
15. Next, you will need to set the schedule. Click on the "Schedule" tab to get the following
interface:
12. Set the active alarm time for each of the weekdays. You can also set a holiday schedule
and add required dates to it. The holiday schedule overtakes the normal schedule.

4.5.3 Sterile Area

Sterile Area Analytics will detect if
any defined object entered the
defined area.
1. Go to "Advanced Analytics"→
"Sterile Area" to get to the
interface as shown to the right:
2. Enable Alarm if required.
3. Set weather to save the scene
image (Panoramic Picture) or the
object image (Target Cutout)
4. Set the alerting objects and
detection sensitivity (Objects not
marked will be ignored)
5. Set the Alarm response as
follows and click "Save" to
confirm: