Page 52
Notice:
1)
You must not disconnect to PC or close the IPC during the upgrade process to
prevent permanent damage to the camera.
2)
The camera update file is ***.TAR. the "TAR" file should not be extracted.
4.3 Playback
Playing back videos taken by the camera have 2 options:
A.
Video files/Images saved locally on the PC (If any were taken)
B.
Video files/Images saved on the Camera SD card (If available)
To access the playback interface, click on the "Search" Main tab. The interface below will
appear.
1)
First, you will have to choose which type of media you wish to search. On the left
top corner choose from Photo and Video
2)
Choose the location of the stored media. You can either choose "Local" – which is
your PC or you can choose "SD Card" which is the camera's SD Card.
3)
If you chose the SD card as the search source you can also define the alarm trigger
as follows:
4)
Set the search range. You can choose a single day and set a time range of up to 24
hours. (full day). Once finished click on "Search" to show the results.
IP CAMERA USER MANUAL
Need help?
Do you have a question about the IP Series and is the answer not in the manual?
Questions and answers