Video Mask - Provision ISR IP Series User Manual

Page 18

4.2.4 Video Mask

You can set 4 mask areas at most.
To set up video mask
1. Enable video mask.
2. Move the PTZ to the required location using the PTZ controls
3. Click "Draw" button and then drag the mouse to draw the video mask area.
4. Click "Save" button to save the settings.
5. Return to the live to see the following picture.
To clear the video mask:
1. Choose the video mask line you wish to delete
2. Click on "Delete" and confirm.
4.3 PTZ
PTZ section includes all the parameters and settings for the PTZ control and preconfigured
actions such as presets, cruises, scans and schedules.
IP CAMERA USER MANUAL