Advanced Analytics; Camera Tampering - Provision ISR IP Series User Manual

Page 27
C. Day/night switch linkage: This mode allows you to set the relay condition according
to the day/night mode of the camera.
D. Schedule mode: This mode allows you to set the relay condition according to a
pre-defined schedule.
Once chosen you will have to set the schedule. The set schedule will be relevant for
all weekdays and cannot be set for each day independently.
3. Press the "Save" button to save the settings.

4.5 Advanced Analytics

This version offers advanced video analytics that was designed to detect special scenarios and
events. In Eye-Sight v2, the Video analytics detection is based on true object detection of 3
classes: Humans, 4 wheel vehicle and 2 wheel vehicle. v5.1 offers a variety of Analytics based
on Object detection (Line Crossing, Sterile Area, Object Counting) together with advanced
face detection and other general analytics such as Camera Tampering
Note that some features might not be available in specific models. For confirmation please
refer to the camera's technical specs.

4.5.1 Camera Tampering

Camera tapering uses special analytics algorithm to detect if the camera was tampered with.
This includes: Camera tampering – detects if the camera was shifted from its original location,
covered or that the lens was tampered with. Color cast detection – detects if the camera
image suffers from unusual color (For example faulty ICR results in pinkish) image.
1.Go to "Advanced Analytics"→ "Camera Tampering" to get to the interface as shown below:
2. Enable the required detection analytics out of Camera Shifting/Lens Tampering/Masking
detection.
IP CAMERA USER MANUAL