Maintenance; Configure Backup & Restore - Provision ISR IP Series User Manual

Page 50

4.2 Maintenance

Maintenance includes 4 submenus: Backup & Restore, Reboot, Upgrade and Operation log.
4.2.1 Configure Backup & Restore
Backup and restore are used to save the camera's configuration on a PC and use it in case the
camera's configuration was changed or when you wish to change the configuration of several
cameras to be uniformed. This section also allows you to restore the camera's setting to
factory default with some exceptions.
Go to "Maintenance"→" Backup and Restore".
•
Importing Settings: If you have a configuration file and you wish to import it to the camera,
click on "browse" and choose the relevant config file.
After choosing the file click on "Import settings" and wait for the process to finish.
•
Exporting settings: If you wish to export the configuration settings of the camera click on
"Export". Choose the location on your PC and set the file name. Click on "OK" to save the
file on the desired location.
•
Loading factory default: If for any reason you wish to restore your camera settings to
factory default, you can use the "Load Default" button. Notice that you can mark some
configuration that will be saved:
o Network Config: Will save all the network section configuration
o Security Configuration: Will save all the security section configuration.
o Image configuration: Will save the image section configuration.
IP CAMERA USER MANUAL