Storage - Provision ISR IP Series User Manual

Hide thumbs Also See for IP Series:

Hello, I am your AI assistant. How can I help you?

Table of Contents

Page 11

From here you can set the path on your computer where local snapshots and videos will

be saved.

You can also choose if the camera will show the current bit-rate on the live-view image

(Local interface only).

4.1.4 Storage

The SD card feature allows you to insert an SD card into the camera and enable the camera to

operate with a local storage. The SD card will be used for both snapshot and video files. You

can allocate a certain percentage for each from the settings menu.

1. Go to "System Configuration" →"Storage" as shown below:

If it is the first time you are using the SD card with the camera or if the state is showing

any value different than "Normal", you should click on "Format" before the SD card will

be available for recording.

Click "Eject card" to stop writing data to SD card and allow you to remove it safely.

Inserting an SD card to the camera must be done while the camera is powered off.



Note: Using of SD card function should be coordinated with motion or sensor

alarms.

The following table will explain the available detail field.

IP CAMERA USER MANUAL

Table of Contents

Show Quick Links

Table of Contents