Reboot Device; Upgrade - Provision ISR IP Series User Manual

Page 51
IP CAMERA USER MANUAL

4.2.2 Reboot Device

Go to "Maintenance"→"Reboot" to see the interface as shown below.
In order to reboot the IPC click on the reboot "Reboot" button and confirm the pop up
prompt message, then wait for the reboot process to finish.
You can also set a scheduled reboot. Tick the "Time Settings" and set the time period and
time for the reboot. You can choose a day of the week when the reboot will automatically
take place or you can set it to happen on a daily basis. The reboot will occur on the specified
day and time.

4.2.3 Upgrade

Go to "Maintenance"→"Update" to open the interface as shown below.
1. Click "Browse" button to select the upgrade file.
2. Click "Upgrade" button to start the upgrading process of the IPC.
3. The device will restart automatically once completed.
4. Depending on the update release note, the IPC configuration might reset.