Figure 35: Dialog Window Device List, Update - WAGO 750-484 Manual

2 ai 4-20 ma hart ex i 2-channel-analog input module 4-20 ma hart, ex i

Hide thumbs Also See for 750-484:

Table of Contents

WAGO-I/O-SYSTEM 750

750-484 2 AI 4-20 mA HART Ex i

Confirm the selection by clicking [OK].

Depending on the entry "<M01_Ch01>...HART DTM*" or

"<M01_Ch01>...HART DTM*" will be added in the tree structure.

If a HART device is connected to both channels, carry out these steps for

the first channel and then again in a similar manner for the second channel.

22.

Move the mouse to the entry for the channel to which your HART device is

connected in the tree structure, select it by clicking with the left mouse

button, and then click Set up connection on the Device menu. This entry

will now be changed to italics in the tree structure.

If a HART device is connected to both channels, carry out these steps for

the first channel and then again in a similar manner for the second channel.

23.

Move the mouse once again to the entry for the communications DTM in

the tree structure and select it by clicking with the left mouse button.

Next go to More functions on the Device menu and click on Device list on

the sub-menu.

A dialog window with a list of devices will open.

Click on [Update List].

After a while the DTM(s) for the connected HART devices will be shown in

green.