Removing The I/O Module; Figure 9: Removing The I/O Module (Example) - WAGO 750-484 Manual

WAGO-I/O-SYSTEM 750
750-484 2 AI 4-20 mA HART Ex i
6.2.2

Removing the I/O Module

1. Remove the I/O module from the assembly by pulling the release tab.

Figure 9: Removing the I/O Module (Example)

Electrical connections for data or power jumper contacts are disconnected when
removing the I/O module.
Manual
V 1.2.0 HW-Version 04, SW-Version 03
Mounting 41