WAGO-I/O-SYSTEM 750
750-484 2 AI 4-20 mA HART Ex i
Figure 28: Dialog Window "Device List"
Select the device with the address 126 by clicking on it and click [Set DTM
10.
Tag/Address...].
Now, instead of the 126, enter the station address, which is physically set by
the two rotary decade switches (decimal) on your PROFIBUS
coupler/controller, for the "DP slave address" in the new view.
Confirm your entry by clicking [Close].
11.
Use the mouse to select the communications DTM in the tree structure and
right click on Configuration in the context menu.
A dialog window opens with three registers: Device Information, Module
Configuration, and Parameterization.
Manual
V 1.2.0 HW-Version 04, SW-Version 03
Description of Operation
71