Cable Spool Assembly; Cable Spool Assembly; Cable Spool Assembly Components - IBM TS3310 Maintenance Information

Cable Spool Assembly

4
Figure 3-12. Cable spool assembly
Table 3-1. Cable Spool Assembly components
The cable spool assembly in the left was from initial release (2005), the one on the
right is a version from 2007. Although they look different, they are completely
interchangeable, and the remove/replace procedures are the same. Either spool
may be in the library and you may receive either as a Field Support Unit (FRU).
The part number for both is the same. See "Cable Spool Assembly" on page 8-100.
1 2
Plastic
guide peg
1
2
3
3
Spooler flat Terminal
cable Board
handle
4
IBM Part Number
Chapter 3. Library Components
3-9