Manually Unlocking The I/O Station Door; Access Holes For Manually Unlocking I/O Station Doors - IBM TS3310 Maintenance Information

Manually Unlocking the I/O Station Door

If the I/O Station door fails to unlock, you can unlock it manually.
There are 2 styles of I/O Station Lock mechanisms. The early style uses a T10 Torx
wrench to rotate the lock mechanism. The new style has a large push-button type
mechanism behind the hole ( 1 in Figure 8-33) in the I/O station door.
Manually Unlocking the Early Style I/O Station Door
If the I/O Station door fails to unlock, you can unlock it manually.
To manually unlock the early style I/O Station lock, follow these steps:
1. Insert a T10 Torx wrench in the hole ( 1 in Figure 8-33) located on the front of
2. Turn the wrench one-quarter turn counterclockwise to unlock the door.
Figure 8-33. Access holes for manually unlocking I/O Station doors
3. To manually relock the I/O Station door:
Manually Unlocking the New Style I/O Station Door
If the I/O Station door fails to unlock, you can unlock it manually.
To manually unlock the new style I/O Station lock, follow these steps:
1. Insert any straight tool (screwdriver, Torx wrench, etc.) into the hole ( 1 in
8-34
TS3310 Tape Library Maintenance Information
the I/O Station door of the library module you wish to open.
v From the Operator Panel, select Operations → Lock I/O Station
v From the Web User Interface, select Manage Cartridges → Lock/Unlock I/O
Station Doors
Figure 8-33) in the front cover of the I/O station.
1