IBM TS3310 Maintenance Information page 497

|
Table F-2. Status Traps (continued)
| | | Event
| | |
Cartridge Placement
| |
Problem
| | | Drive Load Problem
|
| | |
Library main Access Door
| |
Open
| | | Mailbox Mechanical
| |
Problem
| | |
Excessive Scan Retries
|
| | |
Barcode Label Unreadable 152
|
|
a. The library issues a trap whenever the aggregate state of one of the Reliability, Availability, and Serviceability
|
(RAS) status groups changes. Listening for these traps (rather than querying for them) is the preferred method of
| monitoring the health of the library.
|
Trap ID
134
135
136
137
143
Description
The library set TapeAlert 14, indicating a problem when
placing a tape cartridge.
The library set TapeAlert 15, indicating a problem when
loading a tape drive.
The library set TapeAlert 16, indicating an open library access
door.
The library set TapeAlert 17, indicating a mailbox station
mechanical problem.
The library set TapeAlert 23, indicating that excessive scan
retries occurred.
The library set TapeAlert 32, indicating that a tape cartridge
barcode label could not be read.
Appendix F. SNMP Status MIB Variables and Traps
F-3