IBM TS3310 Maintenance Information page 266

|
|
|
Figure 8-20. Gear racks in the up and down positions
|
Figure 8-21. Placing gear rack in the Down position
8-24
TS3310 Tape Library Maintenance Information
3
To release the gear rack and move it down, follow these steps.
1. Engage the Y-rails of each module in your library configuration. Ensure that the
Y-rails are properly aligned and the thumbscrews are tightened.
2
1
1 is the front Y-rail
4
3
4
3 is the Y-rail (this end up)