Appendix F. Snmp Status Mib Variables And Traps; Status Traps - IBM TS3310 Maintenance Information

Appendix F. SNMP Status MIB Variables and Traps

Table F-1. Status MIB variables
Event
Drive Online/Offline
Status
Physical Library
Online/Offline Status
Robotic Readiness
Library Main Door
I/O Station Door Status
Logical Library
Online/Offline Status
* Because the front portion of the MIB variable object ID (OID), 1.3.6.1.4.1.3764.1.10.10, is the same for all variables
defined in the MIBs, it is omitted in the OID column of this table. For example, the actual OID of the Drive
Online/Offline Status variable is 1.3.6.1.4.1.3764.1.10.10.11.3.1.10.
| |
Table F-2. Status Traps
| | |
Event
| | |
Starting
| | |
Shutting down
| | |
Restarting
|
|
| | |
Startup Sequence
|
Completed
| | | Shutdown Sequence
| Completed
| | |
Change in Online State
|
| | | Physical Library Door
| | Status Change
| | |
I/O Door Status Change
|
| | | Robotics Ready
|
|
|
© Copyright IBM Corp. 2005, 2010
The two tables in this appendix provide a quick reference for the status MIB
variables and status traps.
Object ID*
...11.3.1.10
...14.1
...14.30.2
...14.2
...14.3
...13.2.1.8
Trap ID
1
2
3
101
102
103
104
105
106
Description
Indicates whether the drive is online or offline. If the drive is
offline, use the Operator Panel or Web User Interface to
confirm that the drive is varied ON. Also check library power.
Indicates whether the library is online or offline. Use the
Operator Panel or Web User Interface to confirm that the
library is online and not being configured.
Indicates the library robotics ready status. Verify that the
module door(s) are closed and that the robotics are online.
Indicates the library main door status.
Indicates the library I/O station door status.
Indicates whether a specific logical library is online or offline.
You can use the Operator Panel or Web UI to confirm the
logical library is online and not being configured.
Description
Indicates that the tape library has started running.
Indicates that the library is in the process of being shut down.
Indicates that the library has been restarted. This does not
imply anything about whether the configuration has changed
or not (unlike the standard coldStart or warmStart traps).
Indicates that the library startup sequence has completed.
Indicates that the library shutdown sequence has completed.
Indicates that the online state of the physical library has
changed.
Indicates whether the physical library door has been opened,
closed, locked, or unlocked.
Indicates that an I/O station door has been opened, closed,
locked, or unlocked.
Indicates the library robotics system has transitioned from "not
ready" to "ready". Traps 106 and 107 may occur as part of a
startup or shutdown procedure. If they occur at another time,
a library door may be open.
F-1