Electrostatic Discharge; Service Menus; Logging In With Service Privileges - IBM TS3310 Maintenance Information

Chemical
Before using the library, repair any of the preceding problems.

Electrostatic Discharge

Important: A discharge of static electricity can damage static-sensitive devices or
To prevent electrostatic damage, observe the following precautions:
v Transport products in static-safe containers such as conductive tubes, bags, or
v Keep electrostatic-sensitive parts in their containers until they arrive at static-free
v Cover the unit with approved static-dissipating material. If available, provide a
v Keep the work area free of non-conducting materials, such as ordinary plastic
v Make sure you are always properly grounded when touching a static-sensitive
v Avoid touching pins, wires, or circuitry.
v Use conductive field service tools.

Service Menus

The Service login gives service personnel access to troubleshooting tools.
To access the service functions, log into the Operator Panel using your service
name and password.
When logged into the Operator Panel as Service, there are 2 additional items
available under the Tools menu. They are Factory Defaults and Library Tests.

Logging in with Service Privileges

To log in with service privileges:
1. Access the Logon window of the Operator Panel.
2. Type your service name (service) and password (ser001) in the appropriate
3. Click OK.
The service functions available on the Service menu are also available on the Tools
→ Service menu. Admin and Service users have access to the same service
functions on the Tools → Service menu.
Additional Tools menus available to the Service login are Factory Defaults and
Library Tests. These Tools menus are not available to the Admin login.
7-4
TS3310 Tape Library Maintenance Information
Do not use solvents, cleaners, or other chemicals not approved for use on
this product.
microcircuitry. Proper packaging and grounding techniques are
necessary precautions to prevent damage.
boxes.
stations.
ground strap connected to the work surface and properly grounded tools and
equipment. If a ground strap is not available, touch a metal surface to discharge
any static electricity in your body.
assembly aids and foam packing.
component or assembly.
fields.