Flow Control - Doosan DX700LC Operation And Maintenance Manual

FLOW CONTROL

The flow control is used to set the proper flow rate for an
optional attachment (If equipped). The flow control screen is
accessed directly from the normal display screen without going
through the main menu or any submenus.
When the flow control button (Figure 73 and Figure 100) is
pressed at the normal display screen (Figure 99), the flow
control screen (Figure 102) will be displayed.
Select a tool by using the breaker / boost / shear selector switch.
The symbol in the upper left corner of the display screen will
change according to the position that the selector switch is in.
Compare the symbols shown in (Figure 102 and Figure 103).
Operating Controls
2-44
E
C H
Figure 99
7
Figure 100
I
O
II
Figure 101
F
C H
FG013591
FG013896
FG000025
OP001121