Unauthorized Modifications; General Hazard Information - Doosan DX700LC Operation And Maintenance Manual

UNAUTHORIZED
MODIFICATIONS
Any modification made without authorization or written approval
from DOOSAN can create a safety hazard, for which the
machine owner must be held responsible.
For safety's sake, replace all OEM parts with the correct
authorized or genuine DOOSAN part. For example, not taking
the time to replace fasteners, bolts or nuts with the correct
replacement parts could lead to a condition in which the safety
of critical assemblies is dangerously compromised.
GENERAL HAZARD
INFORMATION
Safety Rules
Only trained and authorized personnel can operate and maintain
the machine.
Follow all safety rules, precautions and instructions when
operating or performing maintenance on the machine.
Do not operate the machine if you are not feeling well, if you are
taking medication that makes you feel sleepy, if you have been
drinking, or if you are suffering from emotional problems. These
problems will interfere with your sense of judgement in
emergencies and may cause accidents.
When working with another operator or with a person on work
site traffic duty, be sure that all personnel know the nature of the
work and understand all hand signals that are to be used.
Always observe strictly any other rules related to safety.
Safety Features
Be sure that all guards and covers are installed in their proper
position. Have guards and covers repaired immediately if
damaged.
Be sure that you understand the method of use of safety
features such as safety lock lever and the seat belt, and use
them properly.
Never remove any safety features. Always keep them in good
operating condition.
Failure to use safety features according to the instructions in the
Operation and Maintenance Manual could result in serious
bodily injury.
Safety OP001120
1-16