1,000 HOUR / 6 MONTH SERVICE
Perform All Daily, 50, 250 and 500 Hour
Service Checks
Grease Swing Reduction Device
1.
Position the machine on firm, level ground. Lower the front
attachment to the ground and shut down engine.
2.
Remove air vent plug (1, Figure 70) from swing reduction
device. (at manual gerasing ports)
3.
Press grease fitting and inject grease with the grease gun
on the marked point (2, Figure 71).
4.
Install air vent plug (1, Figure 70) in swing reduction
device.
Inspection, Maintenance and Adjustment
1
Figure 70
2
2
Figure 71
1
FG001564
FG016198
OP001123
4-43