Doosan DX700LC Operation And Maintenance Manual page 136

Closing the Window
Be careful that your hands are not caught in window frame.
1. Lower bucket to ground.
2. Set safety lever (Figure 147) on "LOCK", and shut down
engine.
3. Holding upper handles (1, Figure 149) of front window with
left and right-hand, pull lock levers (2, Figure 149) to
release the lock.
4. Push window forward, and lower it slowly.
5. When the bottom of the window, reaches the top of the
front bottom window, push the front window to engage the
lock (2, Figure 148).
6. Check that lock levers are securely latched in the lock
position.
Front Bottom Window
The front bottom window can be removed and stored in the rear
of the cabin.
1. After stowing the front upper window in the cabin ceiling,
remove bottom window (1, Figure 150) from cabin in
direction of the arrow.
2. Set bottom window in rubber holders (2, Figure 151)
behind operator's seat. Secure window with left and right
knobs (3) with push button (4).
Never have wet hands when handling a window. Never
drop window or let it come into contact with other
parts of the machine.
Operating Controls
2-64
WARNING
WARNING
2
Figure 149
1
Figure 150
3
4
2
Figure 151
1
FG000193
FG000194
FG001345
OP001121