Doosan DX700LC Operation And Maintenance Manual page 25

6. Keep the terrain on work sites where the machine is
working and traveling in good condition.
• Remove any large rocks or obstacles.
• Fill any ditches and holes.
• Provide machines for and schedule time to maintain
the terrain conditions.
7. Travel over longer distance (e.g. on public roads) at
adjusted (medium) speed.
• Always adjust the speed for preventing bouncing.
Mounting and Dismounting
Before getting on or off the machine, if there is any oil, grease,
or mud on the handrails, steps, or track shoes, wipe it off
immediately. Always keep these parts clean. Repair any
damage and tighten any loose bolts.
Never jump on or off the machine. In particular, never get on or
off a moving machine. These actions may lead to serious injury.
When getting on or off the machine, always face the machine,
and maintain three-point contact (both feet and one hand or one
foot and both hands) with the handrails, steps, and track shoes
to ensure that you support yourself securely.
Never hold any control levers when getting on or off the
machine.
Apply the door lock securely. If you grip the handrail inside the
door when moving on top of the track shoes, and the door lock is
not applied securely, the door may move and cause you to fall.
Use the points marked by arrows in the diagram when getting on
or off the machine.
Safety
Figure 3
FG000355
OP001120
1-19