Doosan DX700LC Operation And Maintenance Manual page 112

Menu Display Order and Icon Explanation
1. Fuel Filter
5. Pilot Filter
Figure 90
Filter / Oils Operating Hour Reset
After changing a filter or oil, reset the operating hour to zero
(Hrs: 0000). The next replacement period can than be easily
checked. The operating hours are only accumulated while the
engine is running.
On the filter / oil information screen, press the "SELECT" (
button and then the reset screen will be displayed.
On the reset screen, the operating hour can be changed to zero
hour (Hrs: 0000) by pressing the "SELECT" (
If the "SELECT" (
completed. and the screen will be returned to the previous
menu.
If the "ESC" ( ) button is pressed, the screen will be returned
to the previous menu without being reset.
NOTE: If more than twenty seconds are spent in the menu,
without changing the screen, it will return to the
normal display screen.
The screen is returned to the main menu by pressing the "ESC"
( ) button.
Operating Controls
2-40
2. Air Cleaner
6. Engine Oil
) button is pressed, the reset will be
3. Engine Oil Filter
7. Hydraulic Oil
)
).
Figure 91
4. Hyd. Oil Filter
8. Coolant Water
Filter/Oil Information
P
RESET?
NO : ESC
YES :
: UP : DOWN
FG001358
R
: SELECT
FG013716
OP001121