Doosan DX700LC Operation And Maintenance Manual page 23

Inside Operator's Compartment
When entering the operator's compartment, always remove all
mud and oil from the soles of your shoes. If you operate the
travel pedal with mud or oil stuck to your shoes, your foot may
slip and this may cause a serious accident.
After using the ashtray, make sure that any matches or
cigarettes are properly extinguished, and be sure to close the
ashtray. If the ashtray is left open, there is danger of fire.
Do not stick suction pads to the window glass. Suction pads act
as a lens and may cause fire.
Do not leave lighters laying around the operator's compartment.
If the temperature inside the operator's compartment becomes
high, there is danger that the lighter may explode.
Do not use cellular telephones inside the operator's
compartment when driving or operating the machine. There
is danger that this may lead to an unexpected accident.
Never bring any dangerous objects such as flammable or
explosive items into the operator's cabin.
To ensure safety, do not use the radio or music headphones
when operating the machine. There is danger that this may lead
to a serious accident.
When operating the machine, do not put your hands or head out
of the window.
When standing up from the operator's seat, always place safety
lock lever securely in the "LOCK" position. If you accidentally
touch the work equipment levers when they are not locked, the
machine may suddenly move and cause serous injury or
damage.
When leaving the machine, lower the work equipment
completely to the ground, set safety lock lever to the "LOCK"
position and shut down engine. Use the key to lock all the
equipment. Always remove the key and take it with you.
Clothing and Personal Protective Items
Contain long hair, and avoid loose clothing and jewelry. They
can catch on controls or in protruding parts and cause serious
injury or death.
Do not wear oily clothes. They are highly flammable.
Full eye protection, a hard hat, safety shoes and gloves may be
required at the work site.
While working on the machine, never use inadequate tools.
They could break or slip, causing injury, or they may not
HAOA020L
adequately perform intended functions.
Figure 2
Safety OP001120
1-17