Flow Control - Doosan DX140R Operation & Maintenance Manual

FLOW CONTROL

The flow control is used to set the proper flow rate for an
optional attachment (If equipped). The flow control screen is
accessed directly from the normal display screen without going
through the main menu or any submenus.
When the flow control button (Figure 69 and Figure 96) is
pressed at the normal display screen (Figure 95), the flow
control screen (Figure 98) will be displayed.
Select a tool by using the breaker/boost/shear selector switch.
The symbol in the upper left corner of the display screen will
change according to the position that the selector switch is in.
Compare the symbols shown in (Figure 98 and Figure 99).
DX140R/DX140LCR
E
C H
Figure 95
7
Figure 96
I
O
II
Figure 97
F
C H
FG013591
FG013896
FG000025
Operating Controls
2-43