Summary Of Safety Precautions For Lifting In Digging Mode - Doosan DX700LC Operation And Maintenance Manual

SUMMARY OF SAFETY
PRECAUTIONS FOR LIFTING IN
DIGGING MODE
Unsafe use of the excavator while making rated lifts could
cause serious, potentially fatal injuries or extensive
damage to the machine or nearby property. Do not let
anyone operate the machine unless they've been properly
trained and understand the information in the Operation
and Maintenance Manual.
To lift safely while in Digging Mode, the following items must be
evaluated by the operator and the work site crew.
• Condition of ground support.
• Excavator configuration and attachments.
• Weight, lifting height and lifting radius.
• Safe rigging of the load.
• Proper handling of the suspended load.
Tag lines on opposite sides of the load can be very helpful in
keeping a suspended load secure, if they are anchored safely to
control points on the ground.
NEVER wrap a tag line around your hands or body.
NEVER rely on tag lines or make rated lifts when wind gusts
are more than 48.3 km/h (30 MPH). Be prepared for any type
of wind gust when working with loads that have a large
surface area.
Always engage the "Digging Mode" control on the Instrument
Panel before using the excavator for lifting work.
If you need more information or have any questions or
concerns about safe operating procedures or working the
excavator correctly in a particular application or in the
specific conditions of your individual operating environment,
please consult your local DOOSAN representative.
Safety
DANGER
WARNING
WARNING
OP001120
1-15