Doosan DX700LC Operation And Maintenance Manual page 109

Display Selection and Escaping
Display Selection
When the display button (Figure 81) is pressed for more than
three seconds, the main menu screen (Figure 83) is displayed.
In the normal display screen, the engine speed (rpm), battery
voltage (volt), front pump pressure (bar), and rear pump
pressure (bar) can be displayed.
ESC Button
The screen will return from the main menu to the normal display
screen, by again pressing the "ESC" (
NOTE: If more than twenty seconds are spent in any menu,
without changing the screen, it will return to the
normal display screen.
Main Menu
The menu selection can be changed by pressing the "UP" (
or "DOWN" ( ) buttons. The selected menu item will be
highlighted, and a cursor will appear by the menu item.
When the selected menu item is highlighted, press the
"SELECT" ( ) button to enter the next submenu.
1. "Language" on page 2-38.
2. "Set Clock" on page 2-38.
3. "Filter / Oil Info" on page 2-39.
4. "Adjust Display" on page 2-41
5. "Set Password (Lock and Unlock)" on page 2-42
Operating Controls
) button.
)
4
Figure 81
E
C H
Figure 82
MAIN MENU
L 1. Language
2. Set Clock
l
3. Filter / Oil Info
4. Adjust Display
5. Set Password
: UP : DOWN
Figure 83
FG000070
F
C H
FG013591
: SELECT
FG013563
OP001121
2-37