Doosan DX700LC Operation And Maintenance Manual page 181

Rotating Pedal Valve (Optional)
Attachment Rotating by Using the Pedal Valve
1. Pressing end (1, Figure 86) is used to turn clockwise.
2. Pressing end
counterclockwise.
NOTE:
Before activating the pedal, be sure to check
the function of the attachment.
Locking the Pedal
When rotating is not needed, the pedal can be locked by using
the prop rod (3) locking device.
Locking is completed when the top end of the prop (3) is
positioned into pedal hole.
A. Location for "UNLOCKING".
B, Location for "LOCKING".
Attachment Rotation Using the Left-hand Work Lever
(Joystick)
For a machine equipped with an attachment that rotates,
rotation is activated while one of the control buttons is being
pressed on top of the left-hand work lever (joystick).
There are three buttons on top of the left-hand work lever. The
left and right ones are for controlling rotation.
NOTE:The middle button is for the horn.
Left button is for counterclockwise rotation, and the right one is
for clockwise rotation.
Operation
(2, Figure 86) is used to turn
Figure 86
Figure 87
Figure 88
Figure 89 LEFT-HAND WORK LEVER
(JOYSTICK)
1
2
1
2
A
B
FG000405
FG016191
FG000407
FG000035
OP001122
3-39