Table of Contents
Advertisement
5.
Set engine speed control dial to "HIGH IDLE" (Figure 20).
6.
Repeat Step 4 for five minutes. If working speeds continue
to be slow, continue to operate, but use extreme caution
because the machine function may be erratic.
7.
Check for clearance and fully raise the front attachment.
Slowly swing clockwise 3 revolutions. Slowly swing
counterclockwise 3 revolutions.
8.
Travel forward and reverse at low speed for two
revolutions of the drive sprocket.
Operation
Figure 20
HAOB550L
OP001122
3-11
Advertisement
Chapters
Table of Contents
