Doosan DX700LC Operation And Maintenance Manual page 95

3. Hydraulic Oil Temperature Gauge
The colored bands indicate the temperature of the
hydraulic oil
WHITE ZONE (
the normal operating temperature.
BLUE ZONE (
normal operating range.
RED ZONE (
During operation, the pointer must be in the blue zone.
If the gauge pointer moves into the red zone, the hydraulic
oil temperature symbol will turn "ON", and be display in the
screen. Allow the engine to run at low idle speed until the
temperature gauge registers in the blue zone again.
NOTE:
See "Abnormal State Warning Symbols" on
page 2-29, for location of this warning symbol
and others.
4. Multifunction Gauge and Graphic
Information Area
See "Multifunction Gauge and Graphic Information" on
page 2-27. This section will have a more in-depth
explanation of the display area.
5. Digital Clock
A digital clock, shows the current time. The displayed
contents are as follows.
Display
MM
DD
W
HH
mm
A (P)
Refer to the "Setting Main Menu" on page 2-35 for time
setting.
Operating Controls
) - Indicates temperature is lower than
) - Indicates temperature is within the
) - Indicates temperature is too high.
Description
Minute
AM (PM)
Figure 43
C
Figure 44
Month
Date
Day
Hour
Figure 45
C
E
H
MM/DD [W] HH:mm
H
FG013673
F
C H
FG013591
FG000044
OP001121
2-23