Doosan DX700LC Operation And Maintenance Manual page 9

Learn the Signal Words Used with the
Safety Alert Symbol
The words "CAUTION", "Warning", and "DANGER" used
throughout this manual and on decals on the machine indicate
degree of risk of hazards or unsafe practices. All three degrees
of risk indicate that safety is involved. Observe precautions
indicated whenever you see the Safety Alert "Triangle", no
matter which signal word appears next to the "Exclamation
Point" symbol.
CAUTION
This word is used on safety messages and safety labels and
indicates potential of a hazardous situation that, if not
avoided, could result in minor or moderate injury. It may
also be used to alert against a generally unsafe practice.
WARNING
This word is used on safety messages and safety labels and
indicates potential of a hazardous situation that, if not
avoided, could result in serious injury or death. It may also
be used to alert against a highly unsafe practice.
DANGER
This word is used on safety messages and safety labels and
indicates an imminent hazard of a situation that, if not
avoided, is very likely to cause death or extremely serious
injury. It may also be used to alert against equipment that
may explode or detonate if handled or treated carelessly.
Safety precautions are described in SAFETY from page 1-4 on.
DOOSAN cannot predict every circumstance that might involve
a potential hazard in operation and maintenance. Therefore the
safety messages in this manual and on the machine may not
include all possible safety precautions. If any procedures or
actions not specifically recommended or allowed in this manual
are used, you must be sure that you and others can do such
procedures and actions safely and without damaging the
machine. If you are unsure about the safety of some procedures,
contact a DOOSAN distributor.
Safety OP001120
1-3