Grease Swing Bearing (Only Manual Greasing) - Doosan DX700LC Operation And Maintenance Manual

A. Arm link joint pin (1 point)
B. Link joint pin (2 points)
C. Arm bucket joint pin (1 point)
D. Bucket link joint pin (1 point)
E. Bucket cylinder rod pin (1 point)
Grease Swing Bearing (Only Manual
Greasing)
1. Position the machine on firm, level ground. Lower the front
attachment to the ground and shut down engine.
2. There are three grease fittings for the swing bearing. Do
not over lubricate. Purge old grease with new. Remove all
purged grease.
Inspection, Maintenance and Adjustment
4-26
C
Figure 36
E
B
Figure 37
Figure 38
A
FG016128
B
D
FG016129
FG016197
OP001123