Do you have a question about the DX140W and is the answer not in the manual?
Questions and answers
merab
March 13, 2025
Hello. How do I check the oil level in the gearbox of a doosan dx 140w?? Where is the measuring axis?
1 comments:
Mr. Anderson
March 13, 2025
To check the oil level in the gearbox of a Doosan DX140W, follow these steps:
1. Ensure the machine is on level ground. 2. Locate the gear oil drain and fill holes on the front lower section of the transmission. 3. Clean any dirt, grease, or foreign materials around the drain and fill holes. 4. Remove the fill plug. 5. Check if the oil level reaches the bottom of the fill hole. 6. If necessary, add approved transmission fluid until it reaches the correct level. 7. Reinstall the fill plug after inspecting and cleaning it.
The measuring axis is the bottom of the fill hole.
This answer is automatically generated
merab
March 13, 2025
Hello. How do I check the oil in my Gadavema Lolof?? Where is the measuring pin?
Need help?
Do you have a question about the DX140W and is the answer not in the manual?
Questions and answers
Hello. How do I check the oil level in the gearbox of a doosan dx 140w?? Where is the measuring axis?
To check the oil level in the gearbox of a Doosan DX140W, follow these steps:
1. Ensure the machine is on level ground.
2. Locate the gear oil drain and fill holes on the front lower section of the transmission.
3. Clean any dirt, grease, or foreign materials around the drain and fill holes.
4. Remove the fill plug.
5. Check if the oil level reaches the bottom of the fill hole.
6. If necessary, add approved transmission fluid until it reaches the correct level.
7. Reinstall the fill plug after inspecting and cleaning it.
The measuring axis is the bottom of the fill hole.
This answer is automatically generated
Hello. How do I check the oil in my Gadavema Lolof?? Where is the measuring pin?