Transportation; Disassembly And Assembly Before And After Transportation - Doosan DX700LC Operation And Maintenance Manual

Obey all local, state or federal regulations for transportation of
excavator. If unsure of regulations check with local authorities.
Check intended route for road width, overhead clearances,
weight restrictions, and traffic control regulations. Special
approval or permits may be required.
DISASSEMBLY AND ASSEMBLY
BEFORE AND AFTER

TRANSPORTATION

When necessary, machine should have counterweight and front
attachment removed for transport between locations. The tracks
should be retracted before removing counterweight and front
attachment.
If equipped, removable counterweight may also have to be
removed.
NOTE: Obey all local, state or federal regulations for
transportation of excavator. If unsure of regulations
check with local authorities.
Check intended route for road width, overhead
clearances, weight restrictions, and traffic control
regulations. Special approval or permits may be
required.
When doing this operation, make sure that it is done on solid
level ground, with adequate room for maneuvering all equipment
and keeping personnel at a safe distance when required.
If engine must be run while performing maintenance, use
extreme care. Always have one person in cabin at all times.
Never leave cabin with engine running.
Personnel and Equipment
1. Disassembly and Reassembly: 3 persons
2. Crane Operator: 1 person
3. Crane Equipment: 1 machine
Transportation
WARNING
Transportation
5
OP001124
OP001124
5-1