Doosan DX700LC Operation And Maintenance Manual page 93

Reference
Number
1
Engine Coolant Temperature
2
Hydraulic Oil Temperature
3
Multifunction Gauge And Graphic
4 Information Area (See page
5
6
7
8 Engine Oil Pressure Warning
Engine Coolant Temperature
9
10
11
12
13
Functional check
When the engine starter switch is turned to the "I" (ON) position,
all gauge bands, switch/button indicator lights and indicator/
warning lights will turn "ON" and the alarm buzzer will sound
about two seconds.
During this functional check, a LOGO will appear on the multi
function gauge in the graphic information area (3 and 4, Figure
40).
Password Activated
If a password has already been set and the system has been
"LOCKED", the password display will appear on the screen once
the functional check has been completed. Enter the password
into the text area and then engage the starter.
NOTE: Refer to "Set Password (Lock and Unlock)" on
page 2-42, for further details.
If the password does not match the stored password, the
engine will not start.
Operating Controls
Description
Fuel Gauge
Gauge
Gauge
2-27)
Digital Clock
Hour Meter
Charge Warning
Warning
Engine Check Warning
Preheat Indicator
Work Light Indicator
Warning Light
CAUTION
Reference
Number
Power Mode Selector Button
14
Economy Mode Selector Button
15
Auto Idle Selector Button
16
Flow Control Button
17
18
Down Arrow Button
19
Display Selector Button
20
21
22 Home Selector Button
Description
(See page 2-33)
(See page 2-33)
(See page 2-34)
(See page 2-34)
Up Arrow Button
(See page 2-35)
(See page 2-36)
(See page 2-36)
Selection Button
(See page 2-36)
OP001121
2-21