I/O Controls; Power Leds - Extron electronics XTP II CrossPoint 1600 User Manual

I/O Controls

NOTES:
• See
the following operations.
• See
Primary functions
Secondary functions
Resets
Port
Configuration
Audio
G Video button — The
functions (•):
❏ Selects and deselects video for a configuration that is being created or viewed and
lights green to indicate that video is available for configuring or for viewing.
• With the
• Selects the RS-232 protocol for the rear panel Remote port in Serial Port
Configuration mode and indicates the selection.
H
Audio button — The
functions (•):
❏ Selects and deselects audio for a configuration that is being created or viewed and
lights to indicate that audio is available for configuration or viewing.
• Selects the Audio mode, in which you can adjust the analog input audio level and
the analog output audio volume.
• With the
• Selects the RS-422 protocol for the rear panel Remote port in Serial Port
Configuration mode and indicates the selection.

Power LEDs

I Primary and Redundant Power Supply LEDs —
NOTE: See
LEDs.
Green — Indicates that the associated power supply is operating within normal
tolerances.
Red — Indicates that the associated power supply is operating outside the normal
tolerances or has failed.
Front Panel Operations, beginning on page 37 for detailed descriptions of
figure 30 on page 30, figure 31
Action Select video
Indication Green: selected
VIDEO
Action 1:
Action Select RS-232.
Indication Blink: selected
Action
button has one primary function (❏) and two secondary
Video
button, commands the front panel system reset.
Audio
button has one primary function (❏) and three secondary
Audio
button, commands the front panel system reset.
Video
item , on page 29, to identify the power supplies indicated by the
B
XTP II CrossPoint 1600, 3200, and 6400 Switchers • Operation
on page 31, and figure 32
Select audio
Red: selected
AUDIO
Perform a system reset.
Select RS-422
Blink: selected
Select Audio mode.
on page 32.
36