Front Panel Controls And Indicators - Extron electronics DXP 44 HD 4K User Manual

•
•

Front Panel Controls and Indicators

NOTE: When the switcher is in either power-save mode (see
The buttons on the DXP HD 4K front panels are grouped into two sets, with the input and
output buttons located on the left side of the control panel and the Control and I/O buttons
on the right.
Each DXP model has the same number of input buttons as output buttons, regardless
of how many rear panel input and output connectors it actually has. On models with four
inputs or outputs, buttons 5 through 8 behave like buttons 1 through 4, selecting inputs or
outputs 1 through 4.
The buttons differ for the two DXP HD 4K series as follows:
•
•
Depending on the operation, the buttons or LEDs blink or light steadily when pressed.
The front panel buttons have multiple functions, which are classified as primary and
secondary.
A A
Extron
1
5
CONFIG
A
B
C
D
Figure 13.
Figure 13 shows a DXP 88 HD 4K front panel. The DXP 44 and 84 front panels are identical
to this one.
Room — A subset of outputs that are logically related to each other, as determined by
the operator. The switchers support up to 10 rooms, each of which can consist of 1 to
16 outputs. Each room can have up to 10 presets.
Room preset — A configuration consisting of outputs in a single room that has
been stored. When a room preset is recalled from memory, it becomes the current
configuration for the outputs assigned to that room only (none of the other outputs are
affected). Room presets can be saved and recalled only via SIS commands or the PCS
software.
commands on page 76), all front-panel indicators are unlit with the exception of the
LED or button, which blinks continuously.
Video Video
DXP 88 HD 4K series — The buttons are black and do not illuminate. At the right of
each button is a bicolor LED that lights to indicate the button status or current function.
DXP 1616 HD 4K series — The buttons are tri-color, able to illuminate red, green, or
amber. They can be labeled with text or graphics. You can set these buttons to have
amber background illumination when not pressed, or you can disable the background
illumination (see Setting the Button Background Illumination — DXP 1616 Series
Only on page 53).
B B C C
INPUTS OUTPUTS
1 2
2 3 4
6 7 8 5 6
Config port
Input buttons
Output buttons
Control buttons
DXP HD 4K 88 Series Front Panel
D D E E
VIDEO
3 4
ENTER PRESET ESC I/O
7 8
AUDIO
I/O button
E
Audio and Video LEDs
F
Signal LEDs
G
HDCP LEDs
H
DXP HD 4K Series • Operation
Power save mode
SIS
F F G G
DXP HD 4K SERIES
INPUTS
DIGITAL CROSSPOINT MATRIX SWITCHER
SIGNAL
1 2 3 4 5 6 7 8
HDCP
H H
17