Extron electronics XTP II CrossPoint 1600 User Manual page 139

2. Click the link (see
Firmware
3. Select the desired firmware file to download and click
TIP: Click the desired
4. Enter the requested personal information (
TIP: Click
Remember Me
5. Click to copy the software or firmware to your computer (
Download
6.
Click to confirm that you want to run the installation (
Run
7. Click twice (see figure
Run
update from the Extron Website and starts the Extron Installation Program to extract the
firmware file.
8. Click ( ). The program extracts the firmware files and places them in a folder
Next 2
identified in the InstallShield Wizard window. Note the folder to which the firmware file is
saved.
9. Click to exit the program (
Finish
10. Connect the PC to the XTP II CrossPoint switcher via the LAN port of the switcher.
11. Access the XTP II CrossPoint switcher using HTML pages (see
Startup Page on page 120).
XTP II CrossPoint 1600, 3200, and 6400 Switchers • HTML Operation
figure 65, on the previous page).
2
letter to jump to the correct page of downloads.
Filter By:
).
4
to eliminate step 4 in future downloads.
66, on the next page). The PC downloads the firmware
1
).
3
( ).
Download
3
).
5
).
6
Download the
131