Viewing And Adjusting The Input Audio Level - Extron electronics XTP II CrossPoint 1600 User Manual

5. Mute outputs: One at a time:
a. Press and hold the
returns to its previous state. The output 3 video and audio signals are unmuted.
b. Press and hold the
returns to its previous state. The output 4 video and audio signals are unmuted.
Unmute outputs one at a time.
NOTE: If both video and audio are selected, the unmute action toggles both
6. Exit View-only mode: Press and release the
Press the button.
The View button returns to unlit or background illumination.

Viewing and Adjusting the Input Audio Level

The level of each analog audio input can be displayed and adjusted through a range of
-18 dB to +24 dB to ensure that there is no noticeable volume difference among sources
(see figure 38). The audio level can be adjusted from the front panel or under remote control.
The default audio level is 0 dB.
dBu VU
+24 21
+21 18
+19 15
+16 12
+13 9
+10 6
+7 3
+4 0
+1 -3
-2 -6
-5 -9
-8 -12
-12 -15
-15 -18
-18 -21
Low Audio
Output Level
dBu VU
+24 21
+21 18
+19 15
+16 12
+13 9
+10 6
+7 3
+4 0
+1 -3
-2 -6
-5 -9
-8 -12
-12 -15
-15 -18
-18 -21
High Audio
Output Level
Figure 38.
Output 3
Output 4
Press and hold the Output 3 button.
3
2 seconds
Press and hold the Output 4 button.
4
2 seconds
the video and audio outputs. If either the video output or the audio output is
already unmuted, the muted output is unmuted and the unmuted output is
muted.
All input buttons and output buttons
VIEW
return to unlit or background illumination.
VCR
Local Audio
Inputs
INPUTS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
OUTPUTS
CONTROL
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 CONFIG
ENTER PRESET VIEW
PRIMARY 1 2
REDUNDANT
POWER
XTP II CrossPoint 1600
Local Audio
Inputs
CD Jukebox
Audio Gain and Attenuation
XTP II CrossPoint 1600, 3200, and 6400 Switchers • Operation
button for approximately 2 seconds until the button
button for approximately 2 seconds until the button
The button returns to its previous indication
3
(either lit, background illuminated, or unlit)
to indicate that the output is unmuted.
The button returns to its previous indication
4
(either lit, background illuminated, or unlit)
to indicate that the output is unmuted.
button.
View
dBu VU
+24 21
+21 18
+19 15
+16 12
No noticeable
+13 9
+10 6 volume differences
+7 3
between sources
+4 0
+1 -3
-2 -6
-5 -9
-8 -12
-12 -15
-15 -18
-18 -21
Output
Level
I/O
ESC VIDEO AUDIO
XTP II CROSSPOINT 1600
XTP SERIES DIGITAL MATRIX SWITCHER
Audio System
51