Table of Contents
Advertisement
•
•
Front Panel Controls and Indicators
NOTE: When the switcher is in either power-save mode (see
The buttons on the DXP HD 4K PLUS front panels are grouped into two sets, with the input
and output buttons located on the left side of the control panel and the Control and I/O
buttons on the right.
Each DXP model has eight input buttons and output buttons, regardless of how many rear
panel input and output connectors it actually has.
NOTE: Although the DXP 44 and 84 both have eight input and eight output buttons, not
At the right of each button is a bicolor LED that lights to indicate the button status or current
function. Depending on the operation, the button LEDs blink or light steadily when pressed.
The front panel buttons have multiple functions, which are classified as primary and
secondary.
A A
E
1
5
CONFIG
A
B
C
D
Figure 6.
Figure 6 shows a DXP 88 HD 4K front panel. The DXP 44 and 84 front panels are identical
to this one except for the product names.
Room — A subset of outputs that are logically related to each other, as determined by
the operator. The switchers support up to 10 rooms, each of which can consist of 1 to
16 outputs. Each room can have up to 10 presets.
Room preset — A configuration consisting of outputs in a single room that has
been stored. When a room preset is recalled from memory, it becomes the current
configuration for the outputs assigned to that room only (none of the other outputs are
affected). Room presets can be saved and recalled only via SIS commands or the PCS
software.
commands on page 51), all front-panel indicators are unlit with the exception of the I/O
Video LED, which blinks continuously.
all these buttons are functional for making ties:
•
DXP HD 4K PLUS 44 — Only input and output buttons 1 through 4 are functional,
except for creating and recalling presets (see
page 22).
•
DXP HD 4K PLUS 84 — All input buttons are enabled, but only output buttons 1
through 4 are functional, except for creating and recalling presets.
B B
C C
INPUTS
OUTPUTS
2
3
4
1
2
6
7
8
5
6
Config port
Input buttons
Output buttons
Control buttons
DXP HD 4K PLUS 88 Series Front Panel
Saving and Recalling Presets
D D
E E
3
4
ENTER
PRESET
ESC
I/O
7
8
I/O button
E
Audio and Video LEDs
F
Signal LEDs
G
HDCP LEDs
H
DXP HD 4K PLUS Series • Operation
Power Save Mode
SIS
on
F F
G G
DXP HD 4K PLUS SERIES
INPUTS
D I G I TA L C R O S S P O I N T M AT R I X S W I T C H E R
VIDEO
SIGNAL
1
2
3
4
5
6
7
8
HDCP
AUDIO
H H
13
Advertisement
Table of Contents
