Extron electronics XTP II CrossPoint 1600 User Manual page 48

2. Select video and audio for the tie: If necessary, press and release the
and the button to light both.
Audio
Press the Video button to toggle on and off.
The button lights green when selected.
3. Select an input: Press and release the
Press the button.
The button lights amber.
2
1 3 4 5
4. Select the outputs: Press and release the
buttons.
Press the buttons.
The buttons blink amber to indicate that the selected video and audio inputs
will be tied to these outputs.
2
1 3 4 5
NOTE: You can cancel the entire set of ties at this point by pressing and releasing
the button. The
Esc
5. Confirm the change: Press and release the
Press the Enter button to confirm
the configuration change.
All input buttons and output buttons
ENTER
return to unlit or background illumination.
The Enter button returns to
unlit or background illumination.
The current configuration (see figure 34) is now input 5 video and audio are tied to output 3,
output 4, and output 8.
Input 5 (video and audio)
tied to outputs 3, 4, and 8
Input
5
3
Output
4
8
Figure 34. Final Configuration, Example 1
XTP II CrossPoint 1600, 3200, and 6400 Switchers • Operation
I / O
VIDEO AUDIO
Press the Audio button to toggle on and off.
The button lights red when selected.
button.
Input 5
INPUTS
6 7
8 15 16
Output 3
OUTPUTS
6 7
8 15 16
button blinks once.
Esc
Enter
Video
Audio
Video
, , and
Output 4 Output 8
C O N T R O L
VIEW ESC
ENTER PRESET
The Enter button blinks
green to indicate the need to
confirm the change.
button.
button
40