Extron electronics XTP II CrossPoint 1600 User Manual page 102

SIS Command and Response Table for Input-Board-Specific Commands (continued)
Command Function
Inputs on XTP CP 4i VGA (Analog Video) Boards (continued)
Pixel phase
NOTE: Pixel phase adjustments are available for RGBHV and non-interlaced component video (YUVp) video inputs.
Set a specific pixel sampling phase
Increment sampling value
Decrement sampling value
View the sampling value
Horizontal shift
Specify a value
Increment value
Decrement value
View
Vertical shift
Specify a value
Increment value
Decrement value
View
Save and recall analog input presets
NOTES:
•
Analog input presets are available for analog (RGB, YUVp, YUVi, S-video, composite) video input signals on an XTP CP 4i VGA
universal analog input board only.
•
Analog input presets save a set of analog variables, such as: horizontal and vertical shift, pixel phase, color and tint, brightness
and contrast, and input type.
Save an analog input preset
Recall an analog input preset
NOTE: X^ = Input number (for other than tie)
X3# = Shift
X3$
= Analog input preset
SIS Command Response
(Host to Unit) (Unit to Host)
E X^ X3@ }
I * PHAS PhasI
E X^ }
I +PHAS PhasI
E X^ }
I –PHAS PhasI
E X^ } X3@]
I PHAS
E X^ X3# }
I * HCTR HctrI
E X^ }
I –HCTR HctrI
E X^ }
I +HCTR HctrI
E X^ } X3#]
I HCTR
E X^ X3# }
I * VCTR VctrI
E X^ }
I +VCTR VctrI
E X^ }
I –VCTR VctrI
E X^ } X3#]
I VCTR
X^ X3$
*1* , Spr
X^ X3$
*1* . Rpr
– , , or
01 16 32 64
00000 through 65535
1 through 8
XTP II CrossPoint 1600, 3200, and 6400 Switchers • Programming Guide
Additional Description
X^ X3@]
Specify the pixel sampling phase.
*
X^ X3@]
Increase the phase value.
*
X^ X3@]
Decrease the phase value.
*
Show the pixel sampling phase.
X^ X3#]
Set the horizontal location of first active
*
pixel in input
X^ X3#]
Increase the value by one pixel (shift the
*
image to the right).
X^ X3#]
Decrease the value by one pixel (shift
*
the image to the left).
Show the horizontal location of first
active pixel in input
X^ X3#]
Set the vertical location of first active
*
pixel in input
X^ X3#]
Increase the value by one line (shift up).
*
X^ X3#]
Decrease the value by one line (shift
*
down).
Show the vertical location of first active
pixel in input
X^ X3$]
*1* Command character is a comma.
X^ X3$]
*1*
Command character is a period.
X^
.
X^
.
X^
.
X^
.
94