Control Elements For Cockpit App - Otto Bock 1B1-2 Meridium Instructions For Use Manual

Cockpit app
4) Tap the Add component button.
→ The Connection Wizard opens and guides you through the process of establishing a connection.
5) Follow the subsequent instructions on the screen.
6) After the Bluetooth PIN is entered, a connection to the component is established.
→ While the connection is being established, 3 beep signals sound and the
The symbol is displayed when the connection has been established.
→ Once the connection has been established, the data are read from the component. This process may take up to
a minute.
Then the main menu appears with the name of the connected component.
INFORMATION
After the initial connection to the component has been established successfully, the app will connect automatically
each time it is started. No further steps are required.

8.3 Control elements for cockpit app

1
Product
2
2. Golf
1. Basic Mode
4
5
6
100% 1. Basic Mode
18
1. Access the navigation menu (see Page 19)
2. Product
The component name can only be changed with the adjustment soft­
change
ware.
3
3. If connections to more than one component have been saved, you can
switch between the saved components by tapping the change item (see
Page 19).
4. MyModes configured with the adjustment software.
Switch the mode by tapping the corresponding symbol and confirming
by tapping "OK".
5. Currently selected mode
6. Charge level of the component.
Component battery fully charged
7
Component battery empty
8
Component battery charging
The current charge level is also displayed in %.
7. Display and name of the currently selected mode (e.g. 1. Basic Mode)
8. Connection to component has been established
Connection to component has been interrupted. The app is attempt­
ing to re-establish the connection automatically.
No existing connection to the component.
symbol appears.
1B1-2=* Meridium