Call Channel - Icom IC-2800H Instruction Manual

7
MEMORY/CALL CHANNELS

Call channel

1 call channel is available for each band to store a most-often-
used frequency for quick recall.
D Selecting a call channel
q Push [M/C] to select a call chan-
nel.
• Push [CHG/L] if [M/C] is not dis-
played.
• "C" appears when call channel is
selected.
w Push [V/M
] to select VFO mode, if desired.
H
q Select the desired band with [BAND].
w Push [
CALL
lected band's call channel.
[EXAMPLE]: Programming a call channel.
MAIN
MAIN
6.200
EDIT
14
TON
M I D - L O
DUP
38
MAIN
MAIN
6.010
SCP
14
V/M
H
M I D - L O
TS
CALL] for 2 sec. to select the se-
(MR)
S.MW
MW
MAIN
MAIN
MAIN
6.010
EDIT momentarily EDIT
14
TON TON
1
M I D - L O
DUP DUP
D Programming a call channel
q Select VFO mode with the desired band's [V/M
• Push [CHG/L] if [V/M
w Set the desired frequency:
Set the frequency using the desired band's tuning dial.
Set other data (e.g. offset frequency, duplex direction,
subaudible tone frequency, etc.), if required.
e Push the desired band's [S.MW] momentarily to indicate
MAIN
SCP
memory channels.
V/M
H
C
TS
• Push [CHG/L] if [S.MW] is not displayed.
• Do not hold [S.MW] for more than 0.5 sec., otherwise the mem-
ory channel will overwrite the selected memory channel.
r Rotate the tuning dial to select the call channel.
• "C" appears when a call channel is selected.
t Push [
(S.MW)
MAIN
MAIN
MAIN
6.010
EDIT EDIT
14
TON TON
1
M M I D - L O
DUP DUP
call channel
] is not displayed.
H
MW] for 2 sec. to program.
S.MW
MW
MAIN
MAIN
MAIN
6.200
EDIT for 2 sec. EDIT
14
TON TON
C
M M I D - L O
DUP DUP
].
H
MAIN
EDIT
TON
1
DUP