Explicit Definitions - Icom IC-2800H Instruction Manual

FOREWORD
READ ALL INSTRUCTIONS
before using the transceiver.
SAVE THIS INSTRUCTION MANUAL —
struction manual contains important operating instructions for
the IC-2800H.

EXPLICIT DEFINITIONS

The explicit definitions below apply to this instruction manual.
WORD
Personal injury, fire hazard or electric
R WARNING
shock may occur.
CAUTION Equipment damage may occur.
If disregarded, inconvenience only. No risk
NOTE
of personal injury, fire or electric shock.
Versions of the IC-2800H which display the "CE" symbol on the se-
rial number seal comply with the European harmonised standard
ETS300 684 (EMC product standard for Commercially Available
Amateur Radio Equipment).
i
carefully and completely
This in-
DEFINITION
CAUTIONS
RWARNING! NEVER
connect the transceiver to an AC
outlet. This may pose a fire hazard or result in an electric
shock.
RWARNING! NEVER
operate the transceiver while dri-
ving a vehicle. Safe driving requires your full attention—any-
thing less may result in an accident.
RWARNING! HIGH VOLTAGE! NEVER
ble the remote controller. There is a high voltage circuit inside.
NEVER
connect the transceiver to a power source of more
than 16 V DC or using reverse polarity. This will ruin the trans-
ceiver.
NEVER
cut the DC power cable between the DC plug and
fuse holder. If an incorrect connection is made after cutting,
the transceiver may be damaged.
NEVER
place the transceiver where normal operation of the
vehicle may be hindered or where it could cause bodily injury.
NEVER
let objects impede the operation of the cooling fan
on the rear panel.
DO NOT
push the PTT when not actually desiring to trans-
mit.
disassem-