Wireless Operation; Connection; Hm-90 Wireless Microphone - Icom IC-2800H Instruction Manual

optional EX-1759 and HM-90

Connection

Wireless remote control is available when the following op-
tions are used.
HM-90
WIRELESS MICROPHONE
EX-1759
INFRARED RECEIVER
D Recommended connection
Use the microphone cable
for charging
DATA
MIC CONTROLLER
IC-2800H
HM-90
EX-1759

WIRELESS OPERATION

HM-90 wireless microphone

The HM-90's internal battery should be charged when the mi-
crophone is not being held.
Charging period : 1.5 hr. with timer
(or 8 hr. when battery is exhausted)
Operating period : 12 hr. (operation:standby=1:4)
D Charging method
Choose one of the following methods:
Connect the supplied microphone cable from the HM-90 to
the EX-1759.
Connect the supplied microphone cable from the HM-90 to
the main unit.
D Turning the wireless remote ON/OFF
When you use the HM-90 as a wired microphone, the wire-
less remote control circuit can be turned OFF.
The diagram shows that
the wireless remote con-
trol function is turned
ON.
14
Dip switch
1 2 3 4
ON
LOCK
OFF
AFC AFC-OFF PTT-M MW
CALL MR VFO CLR
1 2 3 A
PGR C-SQL DTMF D-OFF
HIGH MID LOW SET
4 5 6 B
57